Shield Cans

This contains the scottyspectrumanalyzer yahoo group backup
Post Reply
Berndt Josef Wulf
Posts: 105
Joined: Sat Apr 28, 2018 6:48 pm

Shield Cans

Post by Berndt Josef Wulf » Sat Jan 31, 2009 11:45 pm


I've uploaded a picture showing the MSA with the shield cans installed. It didn't turn out as pretty as I

planned for, but there is only so much one can do with a pair of tin-snips and a steel ruler...

Most notably, shielding of MOB was the most beneficial followed by shielding for MIXER1 and MIXER2.

I'm talking about 5-10dB reduction of noise and spurii. This unit performed very well just with the shield

fences in place and with the lids removed.

cheerio Berndt

Post Reply