silkscreen soldermask CB-revB

This contains the scottyspectrumanalyzer yahoo group backup
Post Reply
Posts: 40
Joined: Sat Apr 28, 2018 3:54 pm

silkscreen soldermask CB-revB

Post by pzerkel » Mon Aug 24, 2009 2:56 am

I have reluctantly uploaded a variant of the Control Board rev B.

It has silkscreen and solder mask both sides. It accepts SMA connectors without any drilling. C10 through C17 were moved to the bottom of the PCB.

This PCB at 2.67" x 4.25" is much larger than Scotty's ExpressPCB layout.

This is one of the first few PCBs I have laid out. It is completely UNTESTED and UNVERIFIED. Use at your own risk.

Eagle files and gerber files are both available in the N9PCS folder. Again, use at your own risk.

Post Reply