Low Z Measurement; Dip Meter

This contains the scottyspectrumanalyzer yahoo group backup
Post Reply
Sam
Posts: 1151
Joined: Sat Apr 28, 2018 6:49 pm

Low Z Measurement; Dip Meter

Post by Sam » Fri Apr 29, 2011 4:25 pm

I put together some documentation on the fixture I used to measure RF wire resistance. It is optimized for the range 0.01-10 ohms, though it will measure higher impedances:







With a slight modification to add a coupling coil, this fixture can be used as a dip meter to find resonant frequencies:







Sam W.

Post Reply