MSA CB 4 new PCB BOARDs for viewing

This contains the scottyspectrumanalyzer yahoo group backup
Post Reply
spyker49
Posts: 254
Joined: Sat Apr 28, 2018 3:29 pm

MSA CB 4 new PCB BOARDs for viewing

Post by spyker49 » Sun Apr 21, 2013 8:24 am

Hello group



4 new MSA boards: Hot from PCB Layout Presses.

See the 4 x PCB 3-D snapshot jpg in my integrated MSA Files area



BOARD 1: MSA CB [LPT STYLE] direct matching plugs to BOARD 2 Cypress.

Can also be used as MSA CB old LPT style I/F by any CPU with 17 I/O GPIO (5V TTL/CMOS and 3.3V CMOS levels compatible).



BOARD 2: MSA CB CYPRESS [LPT STYLE] CYPRESS USB direct plug into (under) BOARD 1. PCB USB connector needs to be relocated to front bottom.



BOARD 3: MSA CB SPI [direct SPI RAS-PI I/F]. 1:1 SPI cable to external RAS-PI GPIO connector. RAS PI needs external +5V power pack.

Extendable SPI options (more serial bits) and Chip selects.



BOARD 4: MSA CB: NXP ARM CPU: adaptor for USB + ETHERNET LPC1768 MODULE.

SPI cable to BOARD 2 MSA CB SPI.



All comments and errors detection most welcome.



PCB production stage:

Will get quotes for 10-25 sets of panels.

All 4 boards will be panelised into one panel with nice silkscreen



SET UP is the most expensive part. PCBs are cheaper.

PCB will be sold as individual single cut off PCB.

Prices to be advised.



>>>>>>>>>>>>>>

STRAW POLL FOR POTENTIAL CUSTOMERS

NOTE: THIS IS NOT A COMMITMENT TO BUY.

(1) Please state likely Ordering Time, from now to 6 months away.

(2) Please state BLANK PCB BOARD 1, 2, 3, 4 and qty.

(3) Please state ASSEMBLED BOARD 1, 2, 3, 4 and qty.

>>>>>>>>>>>>>>



Please DO NOT flood group with "ME TOO" messages

Send replies to me only:

email: [url=mailto:redmond2@... t=_blank]redmond2@...[/url]



Regards len Spyker

Post Reply