BOARD- 1 MSA CB Caution with the +10V pin out

This contains the scottyspectrumanalyzer yahoo group backup
Post Reply
spyker49
Posts: 254
Joined: Sat Apr 28, 2018 3:29 pm

BOARD- 1 MSA CB Caution with the +10V pin out

Post by spyker49 » Sat Aug 24, 2013 8:22 am

Hello group.



Caution on Board 1- installation:

Please note on Board 1 the physical orientation of the multiple power pin rows ALL [+10V pins and 0V pins] are (leftright swapped)to that of the standard MSA.

Take special care when you are rewiring the MSA from a previous MSA CB [LPT] loom, you need to re-oriented them.

First mark the BOARD 1 PCB +10V pins with a red marker and make sure the MSA 2 pin sockets are correctly aligned.

Apologies Len.

Post Reply