Help with ez-usb

This contains the scottyspectrumanalyzer yahoo group backup
Post Reply
pp2kja
Posts: 12
Joined: Sat Apr 28, 2018 3:52 pm

Help with ez-usb

Post by pp2kja » Tue Aug 11, 2015 6:41 pm

Hi allI would like to get a help from the list. I have making a usb to lpt cable with ez-usb. I can set all programmables bits and return the status bits when requested. However I cannot get the pin11 status as per instructions of Scotty's site.I have measured all cables between lpt conector and the ez-usb board.Maybe I got a counterfeit ez board? The chip's marks are:CY7C68013A-56PVXCB 04 PHI 1334
Any help will be appreciated
Kleibe

Post Reply