Re Cutting the ExpressPCB panel

This contains the scottyspectrumanalyzer yahoo group backup
Post Reply
brainerd@wildblue.net
Posts: 32
Joined: Sat Apr 28, 2018 6:48 pm

Re Cutting the ExpressPCB panel

Post by brainerd@wildblue.net » Sun Aug 17, 2008 8:38 pm

I just tried the tile cutter (it has a diamond tipped 7" blade and is water

cooled). It works quite well. The ground plane on the bottom left some

slightly rough edges. Course, this is after using the same blade for cutting 8

boxes of ceramic tile! I got the tile cutter at Home Depot for $80.



Dave - WB6DHW


Post Reply